SUZUKI GSX-8S [2025] - New Generation Touring Screen

PUIG New Generation Touring for the Suzuki GSX-8S

This vehicle-specific touring screen combines increased aerodynamic protection with modern, sporty lines that are coordinated with the front of the Suzuki GSX-8S [2025]. Its contour directs the incoming wind in a targeted manner and relieves the strain on the upper body in particular.

Tested aerodynamic relief

In comparison, 9.5 kg instead of 12.2 kg of pressure load was measured with the disc. This corresponds to an improvement of 22 percent. The relief is particularly noticeable in the torso area and can support driving comfort and reduce fatigue.

Design integrated into the front of the motorcycle

The central area extends from the headlight to the top of the window. Lateral shapes with internal screen printing visually delineate the central area and cover the brackets. Constrictions in the middle area form small air channels, while the lower end is based on the lines of the headlight.

Material and dimensions

• 400mm high and 300mm wide
• 210mm higher than the original
• 3mm thick impact resistant CN acrylic material
• 3mm rounded edges
• 3 mm thick metal holder with corrosion-inhibiting, black textured paint
• Finishes: Clear, Tinted and Strong Tinted

Assembly and instructions

The brackets are screwed together and then connected to the pane. PUIG states around 30 minutes for assembly. The tightness of the screws should be checked regularly. Attaching an additional spoiler or additional cover is not recommended for this window.

Documentation

The design meets the stated requirements of the German TÜV. There is also an ABE document; its specific scope must be checked before use for the respective vehicle.